Frequently Asked Question
Power HIL (P-HIL) Testing of Fast Charging Infrastructure
Last Updated a year ago
This video presents a P-HIL setup for testing Fast Charging Infrastructure. The setup consists of HIL604 and Cinergia GE/EL 100.
In the presented setup, HIL devices simulate the electric vehicle while Power Amplifier serves as an interface towards the Device under test which in this case is the charger. Voltages are measured in the model and outputted to the amplifier, while the amplifier measures the currents and conveys these measurements to the model.
The model interface between the Amplifier and the HIL device, PHIL interface components were used.
The complete setup is shown in the Figure below:
